What is the correct way to use the elevator door in construction?

For some high-rise buildings, it is necessary to install elevators. When construction workers install elevators, we will see outside that the construction team usually installs a construction elevator door at the elevator door. In this way, he can effectively isolate some dangers, because there may be some safety hazards during construction. In this way, the safety of workers can be more guaranteed, and the construction can be more standardized. Then, the following will introduce the correct use of elevator construction.

1. Conduct safety inspections

When the construction elevator runs for the first time, it must be run with no load or full load. The ladder cage should be raised about 1 meter above the ground to stop, check the sensitivity of the brake, then continue to rise the floor platform, and check that the construction elevator protective door is normal before it can be put into operation. When the ladder cage is loaded with people, the load must be evenly distributed. It is strictly forbidden to operate the button when the passenger elevator runs to the uppermost and lowermost floors. It is strictly forbidden to stop using the stroke limit switch to automatically collide. The construction elevator must be sounded before starting. The whistle warns, there should be adequate lighting for night operations. When a double-cage elevator is under inspection or maintenance, the other one cannot run.

2. Safety protection requirements

The facade is welded with small-hole steel mesh or wire mesh and steel plate, which can effectively prevent the waiting construction workers from extending their hands and causing accidents in the operation of the construction elevator, which is convenient for elevator operators to observe the situation in the building. It also facilitates communication inside and outside the building. A warning slogan and a warning line on the skirting board below are sprayed in the middle of the facade to alert the construction personnel. The door shaft is welded by a 16# round tube, which is more convenient to install. It only needs to weld a 90-degree right-angle round tube on the outer frame pole corresponding to the door shaft, and then hang the protective door and use it. Convenience.

3. Operate strictly in accordance with the requirements

During construction on the site, we must strictly follow the requirements of the regulations to use the construction elevator protective doors, do not enter rashly, and do not work carelessly under unknown circumstances. We must know that this is a major event related to the entire family and whether the construction works are safe and smooth. The progress. When choosing a protective door for construction elevators, you should choose strictly according to the specific requirements of the construction site. It is good to choose the appropriate one that meets the construction specifications of the construction site. Every construction worker must take strict precautions and put safety first.

When we install the elevator, it is very necessary to install a construction elevator door at the elevator door, so that not only can the construction safety of the workers be guaranteed. It can also effectively isolate safe areas and dangerous areas, so that the general public can be more assured and at ease. For the correct use of construction elevator doors, the above is all of today's content. More safety issues of passenger elevators are introduced. Please pay attention to our website in detail.