How long does it take to install elevators in old buildings?

Whether installing elevators in old buildings or installing elevators in new buildings, Shijiazhuang's elevator installation time period depends on some key factors. A well-installed and maintained elevator seems simple. When it complements the building it serves, it's as if it's been there all the time. In fact, there are many things to consider before the elevator is ready for operation. From the structure itself to the type of elevator to be installed, the time required to install an elevator is not an accurate science. The following is a list of determinants and why a project might take weeks or months to complete.

1. The type of structure involved

It is safe to say that if everything goes according to plan, shorter buildings will take less time to install than taller buildings. The installation of a five-story building should mean a shorter period of fitting compared to a skyscraper. Normally, when building a new building, elevator shafts/systems will be one of the first things to be installed (in an emergency, their normal operation makes it necessary).

The structure of the building must be able to meet all the requirements of the new elevator. Although the new building requires a lot of time, as the structure is formed, it can meet the needs of elevator installation. If an elevator needs to be installed in an older building, it may be a long process because the building meets the specifications.

Second, the installation process

If the installation is from scratch, it must be poured into a pit made of concrete. The exact requirements for the reinforcement and foundation of the foundation pit may depend on factors such as local or state regulations or the conditions of the land under the building. The size of the pit will vary depending on the project, but the rough average of the pit wall thickness is 8 inches, and the floor is 12 inches.

According to local regulations, safety measures such as sprinklers, fire extinguishers and smoke detectors need to be installed in or around elevators. The water released by the sprinkler itself can be a hazard when it comes to electricity, so it is important to integrate it with the electrical system. A telephone line to other parts of the house (or to the emergency team outside the house) must also be installed.

Three, elevator components and different types

As we mentioned earlier, the impression of a smoothly installed elevator is very simple. However, the elevator construction process from the various parts of the elevator to the layout and execution is a delicate process. It is so accurate that it is reduced to the inch size of the call button. The main components include:

•Elevator car

•Guide system

•Hoist

•control

• Security system

Different types of elevators in use utilize these core components. In addition, the elevator components also contain many separate parts. Each tool must be carefully crafted and applied to maintain normal operation. Passenger elevators are the kind you usually think of, while larger elevators such as freight elevators are larger, wider, and designed for heavy-duty use (and therefore may require longer installation time).

Fourth, safety first

When all the structural and technical requirements are met to create a working elevator, an important aspect must be strictly followed, namely safety guidelines. A new elevator must meet many requirements before it can be considered suitable for use. Professional regulatory agencies will test compliance with this specification, and their thorough inspection will add time to the installation process. After the approved machine reaches the standard, the elevator can start to run.

Five, plan to pay in advance

In short, adding an elevator is like any large installation project. All relevant personnel must be prepared for this unexpected event. There may be some isolated problems and increase the clock time. However, through flexible planning, professional teams and all relevant cooperation, elevator parts can proceed smoothly with little interruption.